LED Controllers & Interfaces

Triac leading edge phase control main dimmer. Idealy suited to Ecopac ELED triac dimmable LED Drivers, can also be used with other triac dimmable drivers.

These high quality dimming modules can be fitted to most dimmer plates with ease.

Other features:

• For use with resistive and inductive loads
• Module case ultrasonically sealed to reduce buzzing
• Smooth dimming operation from 0-100% light output
• Integrated over temperature protection fuse
• 3 years warranty

1-10V dimmer module. Idealy suited to Mean Well LED Drivers, can also be used with other 1-10V dimmable drivers.

These high quality dimming modules can be fitted to most dimmer plates with ease.

Other features:

• Module case ultrasonically sealed to reduce buzzing
• Fits a plaster depth (16mm) mounting box
• Complies with the latest Electrical Safety Standard for dimmer switches EN60669-2-1:2000
• EMC Compliance – EN550155
• 3 years warranty

The Ecopac DALI-801-8A LED dimming inteface can be used in conjuction with non dimmable LED drivers to provide DALI dimming.

• 8A Maximum current
• 12-36VDC input voltage
• 1 DALI address input
• 1 Channel Output

The Ecopac ECP-701-8A LED dimming inteface can be used in conjuction with non dimmable LED drivers to provide 1-10V signal dimming.

8A Maximum current

12-36VDC input voltage

LED RGB TOUCH CONTROLLER

Remote controller for RGB LED strips with touch control for color selection and brightness.

• Power / Watts 18A, 432W
• Voltage / Voltage DC24V

Single colour RF LED dimmer set comprising of remote control and controller. The controller is connected between the LEd driver and LED strip, it requires no line of site because it is RF.

The Ecopac ECP-801-12A LED dimming inteface can be used in conjuction with non dimmable LED drivers to provide 1-10V signal dimming.

• Compact Size, High Output
• Current 1 Channel, max 12A@12~24VDC/max 8A@36VDC/CH Output
• Ultra-pro Push Dim Function
• Directly Support Both AC and DC Input Push Switches
• 1-10V Dimmer Function While Controlled by 1-10V Signal

The 5-channel OLED DMX decoder is suitable for LED strip applications where DIM, CT, RGB, RGBW and RGBWY strip must be controlled with a DMX signal.

5 channels of 5A (25A max) and a maximum power of 600W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: RJ45 and XLR-5. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve.

• Output signal: PWM-CV
• Control: DMX
• RDM Support: Yes
• Dimming Range: 0-100%
• Number of channels: 5
• Warranty: 5 Years
• W x H x D (cm): 12.20 x 11.00 x 3.70